Table of Contents
Advertisement
Disposal, recycling of used tools
12 Disposal, recycling of used tools
In your own interest and to protect the environment
make sure that all machine components are exclusively
disposed of in as intended and permitted.
12.1 Decommissioning
Disused machines must be decommissioned immedi-
ately to prevent misuse at a later point and putting the
environment or persons at risk.
Step 1: remove all environmentally hazardous process-
ing materials from the used machine.
Step 2: if necessary, disassemble the machine into as-
semblies and components that are easy to han-
dle and suitable for recycling.
Step 3: the machine components and processing mate-
rials must be disposed of using the intended dis-
posal methods.
12.2 Disposing of lubricants
Remove escaping, used or excess grease from the lu-
brication points featuring lubricant.
Lubricant manufacturers provide disposal information
for the lubricants used. If necessary, request product-
specific data sheets.
13 Spare parts
DANGER!
Risk of injury due to the use
of wrong spare parts!
Dangers may result for the user and damages as
well as malfunctions may be caused by using wrong
or damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
The manufacturer's warranty will become null and
void if non-permissible spare parts are being used
12
13.1 Spare parts order
The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item No.
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indi-
cations regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of construction on the type plate which is
fixed on the device.
Example
The steering rolls for the pallet truck PHH 1001 must be
ordered. The steering rolls are identified in the spare
parts drawing 1 with the number 44.
When ordering spare parts, send a copy of Spare Parts
Drawing 1 with identified steering rolls and marked item
number 44 to the dealer or spare parts department and
provide the following information:
- Type of device:
- Item number:
- Spare parts drawing: 1
- Position number:
The following drawings are intended to identify the re-
quired spare parts in the event of service. If applicable,
submit a copy of the parts drawing including the high-
lighted components to your authorised retailer.
Scissor Pallet Truck PHH 1001
6150100
44
PHH 1001 | Version 2.03
Advertisement
Table of Contents
