Technical Data; Table; Type Plate; Transport, Packaging, Storage - unicraft PH 1001 Operating Instructions Manual

Technical Data

4 Technical Data

4.1 Table

Model
Load-carrying capacity
Load beraring width
Fork width
Fork length
Fork height min.
Lift height
Chassis height
Steering angle
Steering rollers-Ø
Fork rollers-Ø
Dimensions (L x W x H)
Weight
Dimensions
680
365
1150
Fig. 2: Dimensions PHH 1001

4.2 Type plate

Fig. 3: Type plate PHH 1001
6
PHH 1001
1000 kg
540 mm
160 mm
1.150 mm
85 mm
715 mm
430 mm
210°
180 x 50 mm
74 x 50 mm
1.515 x 540 x 1.225 mm
122 kg
5

Transport, packaging, storage

Delivery
Check the pallet truck for visible transport damage upon
delivery. Immediately notify the spedition or retailer if
you identify damage on the palett truck.
Transport with a crane
The scissor pallet truck may only be loaded and unloa-
ded by qualified personnel!
ATTENTION!
Danger to life from falling load!
Falling loads can lead to serious injuries or even
death.
- Never step under suspended loads.
- Only move loads under supervision.
- Lower the load when leaving the workplace.
- Unsuitable attachment points can fail and the load
can fall. Only attach to the load at suitable attachment
points.
Fig. 4: Attachment points of the pallet truck for transport with crane
The scissor pallet truck can be transported with a crane.
For this purpose, the pallet truckmust be attached to the
crane in accordance with the regulations (Fig. 4). The
attachment points (points marked with load hook sym-
bols) on the pallet truck must be used. The scissor pallet
truck must not be rokked by crane during transport.
Packaging
All packaging materials and packing aids are suitable
for recycling and must always be disposed of using ma-
terial-based recycling systems.
Packaging materials made of cardboard must be shred-
ded and disposed of as part of waste paper recycling.
The foils are made of polyethylene (PE), padding is
made of polystyrene (PS). Dispose of these substances
at a recycling centre or hand them over to the relevant
waste disposal company.
Storage
Lubricate the pallet truck before storage. The scissor
pallet truck must be stored in a clean condition and a
dry, clean and frost-free environment.
PHH 1001 | Version 2.03