Table of Contents
Advertisement
9
Disposal, Reusing used Ma-
chines
In your own interest and to protect the environment make
sure that all machine components are exclusively dis-
posed of in as intended and permitted.
9.1 Decommissioning
Disused machines must be decommissioned immedi-
ately to prevent misuse at a later point and putting the
environment or persons at risk.
Step 1: remove all environmentally hazardous process-
ing materials from the used machine.
Step 2: if necessary, disassemble the machine into as-
semblies and components that are easy to han-
dle and suitable for recycling.
Step 3: the machine components and processing materi-
als must be disposed of using the intended dis-
posal methods.
9.2 Disposal of electrical equipment
Electrical devices contain a large number of recyclable
materials and environmentally harmful components.
These components must be disposed of separately and
professionally. In case of doubt, contact the municipal wa-
ste disposal service.
If necessary, use the services of a specialized waste dis-
posal company for processing.
EHW-Series | Version 1.02
Disposal, Reusing used Machines
9.3 Disposal via municipal collection
points
Disposal of used electrical and electronic equipment
(Applicable in the countries of the European Union and
other European countries with a separate collection sys-
tem for these appliances).
The symbol on the product or its packaging indi-
cates that this product should not be treated as normal
household waste, but must be returned to a collection
point for the recycling of electrical and electronic equip-
ment. By helping to properly dispose of this product, you
are protecting the environment and the health of others.
Environment and health are endangered by improper
disposal. Material recycling helps to reduce the con-
sumption of raw materials. For more information about
recycling this product, contact your local community, mu-
nicipal waste management, or the shop where you pur-
chased the product
9.4 Disposal of lubricants
Remove the escaping, used or excess grease at the lu-
brication points supplied with lubricant.
The lubricant manufacturer provides the disposal in-
structions for the lubricants used. If necessary, ask for
the product-specific data sheets.
21
Advertisement
Table of Contents
