Table of Contents
Advertisement
2.4 Safety on the operation
Do not use a palett truck until you have familiarised
yourself with it or been instructed in it. Read the instruc-
tions on the pallet truck and in the instructions for use
carefully. The instructions must be kept with the product
for inspection.
1. The applicable accident prevention regulations must
be followed. If the pallet truck is intended for use by
employees, the relevant labour regulations must also
be observed, e.g. the accident prevention regulations
General regulations (VBG 1).
2. Before each use of the pallet truck make sure that it is
technically in order. Pay particular attention to the
wheels, drawbar and lifting and lowering device. Ne-
ver use a damaged palett truck. Have any repairs
carried out by specialists only.
3. Never load the forks with a greater load or force than
the maximum load capacity.
4. Make sure that the load is evenly distributed and ne-
ver pick up the load with only one fork or with the fork
tips!
5. Never lift a load when the pallet truck is standing on
an unsuitable surface! Do not place any body parts
(hands, feet) under the forks when a load is lifted!
6. Never attempt to move a load lifted by the pallet truck
on the forks. A lifted load must under no circum-
stances be subjected to an impact or shock load.
7. Never lift a load that can slip or whose individual parts
are not firmly connected to each other with the pallet
truck. Ensure that the pallet truck operator is always
out of reach of any load that may slip or fall from the
forks.
8. Never leave a load lifted by the pallet truck unat-
tended.
9. When using the pallet truck, ensure that the user can
operate the pallet truck with the load without any pro-
blems.
10. Ensure that the surface on which the pallet truck
stands or where it is to be moved has sufficient load-
bearing capacity. If not, the pallet truck must be
placed on wooden or preferably metal planks with
sufficient load-bearing capacity and moved on them.
Such a measure is to be carried out by a Expert
before lifting and moving a load to verify.
PHH 1001 | Version 2.03
WARNUNG!
- In the event of improper use, no liability is as-
sumed for possible consequential damage. This
also applies to the use of unused palett trucks and
any unauthorised modification to them, in particular
the replacement of original parts with parts from
other sources.
- Every machine has residual risks. Great care must
be taken when carrying out all operations (even the
simplest ones).
Safe working depends on you!
3
Intended Use
The scissor pallet truck used exclusively for lifting,
lowering and pulling freely moving loads.
The PHH 1001 palett truck is a combination of scissor lift
and palett truck with a manually operated hydraulic
pump. Due to the low chassis height, the PHH 1001 can
also be used without restriction as a palett truck.
The max. load capacity is 1000 kg.
The palett truck may only be operated by persons who
have been instructed on the device.
Intended use also includes compliance with all informa-
tion in these instructions. Any use going beyond the in-
tended use or any other use is regarded as misuse.
Stürmer Maschinen GmbH accepts no liability for de-
sign and technical modifications to the pallet truck.
WARNING!
Danger in case of misuse!
Misuse of the palett truck can lead to dangerous
situations.
- Do not lift loads connected to the ground.
- Do not pull loads at an angle.
- Do not lift persons or animals.
Claims of any kind for damage due to improper use are
excluded.
Intended Use
5
Advertisement
Table of Contents
