Canon PC300 Service Manual page 85

MECHANICAL SYSTEM
6) Disengage the hook ®, and detach the &. Registration Roller
a roller @® from the pick-up roller Assembly
® i. Detaching the Regisiration Roller
Assembly
© 1) Detach the copyboard drive assembly;
see p. 4-5.
2) Remove the two screws (M4X10; black)
@, and detach the registration roller
assembly @ while lifting its front slightly
(cS and as if to move it to the front.
eS
Figure 4-305
b. PC300/FC210
1) Detach the body cover; see p. 4-1.
2) Bend the pick-up roller support ©, and
detach the pick-up roller @ from the rear
by pulling it to the front.
Figure 4-307
Figure 4-306
COPYRIGHT © 1994 CANON INC. CANON PC300/320/325, FC210!290 REV.0 JULY 1904 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-7