Canon PC300 Service Manual page 81

BU GSS
3. Detaching the Top Cover Assembly
1) Detach the body cover; see p. 4-1.
2) Disconnect the two connectors ©.
ie 2 Figure 4-108
3) Bend the support @ at the front to the
front, and remove the pin @ from the top
cover assembly.
4) Detach the top cover assembly @.
Figure 4-109
1)
2)
IECHANICAL SYSTEM :
Detaching the Delivery Assembly
Cover
Take out the fixing assembly; see p. 4-
13.
Shift the delivery assembly cover @ in
the direction of "close,".and match the D-
cut @ of the hinge with the cut in the
bushing; then, remove it from the front.
5.
1)
2)
Figure 4-110
Deiaching the Bottom Cover
Place the copier with the delivery
assembly at the bottom; then, remove
the two screws (M410; black) @.
Disengage the five hooks @, and detach
the bottom cover @.
Figure 4-111
COPYRIGHT © 1904 CANON INC. CANON PC3003200925, FC2#0/290 REV.O JULY 1994 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-3