Canon PC300 Service Manual page 101

Connect the power cord to the power
outlet and the copier, and switch the
copier ON.
+ Press the +, Clear/Stop, and other keys to make sure
that the copy count is correctly indicated
(PC320/325/FC230).
* Check that '1' goes ON on the display
(PC320/325/FC230).
+ Check that '1' goes ON on the display
(PC320/325/FC230).
+ Check the Main indicator goes: ON (PC300/FC210).
* Check the movement of the copy density lever/dial.
5-4
12 |Set the Test Sheet on the copyboard,
and make copies; make sure that
copies are made properly.
Clean the exterior of the copier and the
area around it.
COPYRIGHT © 1994 CANON INC.
* Make sure no abnormal noise is heard.
+ Make sure that copies are made in the specified
number properly (PC320/325/FC230).
* Check that 'P' is indicated when the Copy Start key is
pressed without setting copy paper
(PC320/325/FC230).
CANON PC300/3207325, FC210/290 REV.0 JULY 1904 PRINTED IN JAPAN (MPRIME AU JAPON)