Canon PC300 Service Manual page 80

ECHANICAL SYSTE
Note:
You must disengage. the five hooks that
hold the body cover in place before
detaching the body cover.
7) Push the hook found down the hole @ in
the body cover @ with a screwdriver,
and lift the body cover slightly.
Figure 4-106 (rear view)
10) Disengage the two hooks at the front
as if to pull the body cover to the front.
11) Detach the body cover © by lifting it.
Figure 4-104 (right view)
8) Push the hook @ found at the right rear
of the body with a screwdriver, and lift
the body cover © slightly.
Figure 4-107
Figure 4-105 (right rear view)
9) Detach the hook at the rear © as if to
pull the body cover @ to the front; then,
lift the body cover slightly.
4-2 COPYRIGHT @ 1994 CANONINC, CANON PC300/220/225, FC210/290 REV.0 JULY 1994 PRINTED IN JAPAN ((MPRIME AU JAPON)