Setting System Lockout; Setting The System Hold Time - Uniden SC230 Owner's Manual

SC230 Paper OM.fm Page 56 Wednesday, October 6, 2004 10:51 AM
After selecting this option, press 1-9 to assign the system
to a quick key or press No to assign the system to no
quick key, then press E.
Hints:
• You can assign as many systems to the same quick
key as you want.
• Preprogrammed conventional systems are set to
quick key 9.
• To be scanned, a system's quick key must be
activated and the system must be unlocked.

Setting System Lockout

program system
Menu
Select the system
E
Edit Sys Option
E
Set Lockout
This setting controls whether the system is scanned when
its quick key is enabled. Rotate the scroll control to select
your setting, then press E.
Locked - the system is not scanned
Unlocked - the system is scanned
Note: You can also lock or unlock a system by pressing
, selecting the system, then pressing
Func

Setting the System Hold Time

program system
Menu
Select the system
E
Edit Sys Option
E
Set Hold Time
This setting controls how many seconds the scanner
scans a system before moving to the next unlocked
system. Enter a value from 0-255, then press E to save
the setting.
Programming/Editing Optional Settings
E
E
Func
E
E
56
+ L/O.