Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fransgard DM-2450
Summary of Contents for Fransgard DM-2450
- Page 1 Manual DM-2450 Disc mower Ab serial # : 57350006 →...
- Page 2 Fransgård Maskinfabrik A/S Fredbjerg DK - 9640 Farsø Phone: +45 98 63 21 22 www.fransgard.dk mail@fransgard.dk...
-
Page 3: Table Of Contents
Ordering spare parts ..............4 Lubrication and Maintenance ............4 Transport chain ................5 Mounting of Disc with hat............... 6 Mounting / assembling instruction ..see www.fransgard.dk TECHNICAL SPECIFICATIONS Working width ..............2,40m/7'9". Transport width .............. 1,90m/6'3". Working speed, max........6-15km/h 3,5-9 mph. -
Page 4: Safety Precautions
SAFETY PRECAUTIONS All screens must be correctly positioned and checked before starting the machine. Take care for stone fling. It is not advisable to remain in the working area of the machine while working parts are rotating. The machine is made to work in grass and strawcrops, and must not be used for anything else. -
Page 5: Working Position
WORKING POSITION Dismount the safety chain and release the transport lock (A). Lover the cutterbar until there is about 20mm. in free of the slide (B) see the illustration. Adjust the tractor´s depth stop, if the tractor´s depth stop is in bad condition, then use enclosed bracket, and tighten the safety chain into the top bar bracket on the tractor, so the machine can be kept in place. -
Page 6: Ordering Spare Parts
ORDERING SPARE PARTS The spare part order must contain the following information: 1. Machine type. 2. Spare part number and description-possibly dimensions and number of parts. LUBRICATION AND MAINTENANCE Lubricate PTO shaft after every 10 hours of operation and lubricate the indicated lubrication points as and when required. -
Page 7: Transport Chain
Transport chain for K & DM- disc mower, And chain for less pressure on the lift arms... -
Page 8: Mounting Of Disc With Hat
Mounting of Disc with hat. Remove the nut, small disc and protection bushing from the shaft. Mount the Disc with hat, as shown on the picture, with the small disc and nut. Mount the plastic cover on the top. (You shall not use the protection bushing)
Need help?
Do you have a question about the DM-2450 and is the answer not in the manual?
Questions and answers