Canon imagePRESS V1000 Customer Expectation Document page 55

Canon
Power Requirements (cont'd)
Part or Accessory
Plockmatic BLM50/BLM35
Trimmer FTR50
Cover Feeder CF50
Booklet Fold BF50
Rotate Crease Trimmer
BCT50
High Capacity Belt Stacker
BST4000-1
Plockmatic Multi-Purpose
Stacker
Inspection Unit-B1
Sensing Unit-B1
IMPORTANT
• Phase converters and step-down transformers are not supported.
• We recommend an additional standard 115 V/15 A receptacle for service tools,
such as a laptop computer or vacuum that may be used when servicing or
configuring the machine.
• Use only dedicated and properly grounded receptacles for the main unit and
imagePRESS Servers.
• Do not use extension cords. The ground connection serves to provide the internal
electronics with a reference voltage. Faulty or poor ground sources will cause
this reference voltage to fall into a range that no longer serves as a reliable
reference voltage. The internal logic and programming of the imagePRESS
V1000 will not perform reliably because there is an insufficient difference
between the internal operating signal voltages and the poor ground reference
signal. A qualified electrician can measure and provide the ground source that
the imagePRESS V1000 or any computer controlled office equipment requires.
• Before installation, confirm that all necessary receptacles are available.
21 Canon USA strongly suggests that the power receptacle for the BLM 50/35 Professional Booklet Maker is connected to a
separate breaker from the power receptacle for the Rotator Module. This is necessary to maintain adequate current for the
Professional Booklet-Maker and each of the modules.
22 Also requires two 120-127 V AC, 60Hz power outlets for Inspection Tool (Workstation) and Monitor.
Revision 4
Power Supply
1-100-230V (±10%) AC,
21
50-60 Hz
From the Plockmatic
BLM50/BLM35 Professional
Booklet Maker
1-100-230V (±10%) AC,
50-60 Hz
1-100-240V (+6%, -10%) AC,
50-60 Hz, 1A
1-100-240V AC, 50/60 Hz,
2A
1-100-240V AC, 50/60Hz,
22
1.4A
1-100-240V AC, 50/60Hz,
2.5A
imagePRESS V1000 Customer Expectations Document
imagePRESS V1000 Customer Expectations Document
Power Supply Cord/Plug
Specifications
NEMA 5-15
—
NEMA 5-15
NEMA 5-15
NEMA 5-15
NEMA 5-15
NEMA 5-15
Length of Power
Cord
6' (1.8 m)
—
6' (1.8 m)
6' (1.8 m)
6.2' (1.9 m)
6.2' (1.9 m)
Page 55