Cleaning; Error Message - Webasto SmartControl Operating Instructions Manual

Press the con tro l knob.
X X
"Quick start" symbol is shown in the display.
Turn the c ontrol knob in order to choose the
X X
desired "Reset" symbol.
"OK" is shown in the display.
Press the con tro l knob in order to confirm
X X
selection.
Then the restart is performed.
5

Cleaning

In order to clean the control element you should use only soft lint-free cloth.
X X
No moisture can enter the housing. You cannot use window pane cleaning
agents, household cleaners, sprays, solvents, cleaning agents contining alcohol
and scouring agents for cleaning.
6

Error message

Error messages regarding the heater will be displayed starting from "F"
marking and they are in the appropriate description of the heater. Error messages
rregarding the control element are displayed by means of „T" symbol. Further
information concerning error information are provided in "Error code" chapter.
www.butlertechnik.com
www.butlertechnik.com
Settings
Quick start
Settings
Reset
Settings
Reset
53