Adjusting The Remaining Operation Time During Functioning - Webasto SmartControl Operating Instructions Manual

Press the c on tro l knob within 5 seconds in
X X
order to confirm selection.
* depending on the installed heater.

4.3.5 Adjusting the remaining operation time during functioning

3
The heater is in the heating mode.
Press the c on tro l knob in order go from tem-
X X
perature selection to heating mode selection.
Press the c on tro l knob in order go from
X X
heating mode selection to remaining operation
time selection.
Turn the c on tro l knob in order to adjust remai-
X X
ning operation time.
By means of turning the control knob in
anticlockwise direction one can shorten remaining
operation time.
If longer remaining operation time is desired then
longer remaining operation time must be reset.
Press the c on tro l knob within 5 seconds in
X X
order to confirm selection.
www.butlertechnik.com
www.butlertechnik.com
17