Adjusting The Remaining Operation Time During Functioning - Webasto SmartControl Operating Instructions Manual

Press the con tro l knob.
X X
Operation time flickers in the display.
Turn the con tro l knob in order to choose the
X X
duration of "an hour".
By means of turning the control knob in a clock-
wise direction one can select and activate maximum
duration.
Press the con tro l knob in order to confirm
X X
selection.
Turn the con tro l knob in order to choose
X X
duration of "a minute".
Press the con tro l knob in order to confirm
X X
selection.
Ventilation starts functioning.
Ventilation symbol and the remaining operation time
appear in the display.
Quick start button shows blue light.

4.8.3 Adjusting the remaining operation time during functioning

3
The heater is in the ventilating mode.
Turn the c on tro l knob in order to adjust the
X X
desired remaining operation time.
By means of turning the control knob in an an-
ticlockwise direction one can shorten the remaining
operation time.
If longer remaining operation time is desired then
longer remaining operation time must be reset.
www.butlertechnik.com
www.butlertechnik.com
Ventilation
Duration
Ventilation
Duration
31