Ultratec EZcom PRO User Manual page 53

Making an HCO call
The EZcom Pro must be sharing a line with a telephone before you
can use HCO.
1. Press the
Dial
2. Pick up the telephone handset and listen for a response.
3. After someone answers, press the
greeting message.
Or, type a greeting message using the EZcom Pro keyboard.
4. Listen for the other person to respond to your typed message.
5. Continue to type to the other person and listen to his or her
response until your conversation is finished.
6. When your conversation is finished, replace the handset on the
telephone and press and hold the
EZcom Pro.
Answering an HCO call
The EZcom Pro must be sharing a line with a telephone before you
can use HCO.
1. When the signaler flashes (if one is connected) and the
telephone rings, press the
2. Press the
Greeting
Or, type a greeting message using the EZcom Pro keyboard.
3. After you or the other person requests HCO, pick up the
telephone handset to listen.
4. Continue to listen to the other person and type responses to him
or her on the EZcom Pro keyboard.
5. When your conversation is finished, replace the handset on the
telephone and press and hold the
EZcom Pro.
key and dial the telephone number.
Greeting
On/Off
key to turn on the EZcom Pro.
On/Off
key to send your greeting message.
On/Off
A DVA N C E D C A L L I N G • 5 1
key to send your
key to hang up the
key to hang up the