Advertisement
Equinox Atria Laser
Operation modes
Operation modes:
The Atria has three modes of operation as follows:
1, Sound active mode
To select sound active mode set all dip switches to OFF. You can now use the sensitivity control on
the back panel to set the required sound level.
2, Auto run mode
To select auto pattern mode, set dip switch 1 to the ON position and all others to OFF. The
Atria will now cycle through all it's internal geometric patterns.
3, DMX mode
To select DMX mode, set dip switch 10 to ON. You can now set the required DMX address using
dip switches 1 to 9. Please refer to the chart below for DMX functions. The DMX address starts at 1.
DMX function chart:
Advertisement
