Table of Contents
Advertisement
A+ Server AS -1114CS-TNR/AS -1114CS-TNR-EU User's Manual
Onboard Power OK LED (LED7)
LED6 is an onboard power OK LED. When this LED7 is lit, it means the system is turned
on, and all the system power rails are ready. When the system is turned off, or any one of
the system power rails fail, this LED will turn off. Turn off the system, and unplug the power
cable before removing or installing any component(s).
M.2 Active LED (LED4 and LED5)
The M.2 Interface Detection LED indicates that an M.2 interface was detected and Active and
working correctly on either M.2-C1 (LED4) or M.2-C2 (LED5)..
Onboard Power
LED Indicator
LED Color
Definition
Off
System Off (power cable not connected)
Green
System On, Power OK
M.2 Active
LED Indicator
LED Color
Definition
Off
Off (Normal)
Green
On (Device active)
66
Advertisement
Table of Contents
