Supermicro AS-1114CS-TNR User Manual page 59

Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach the hardware reset
switch from the computer case to this header to reset the system. Refer to the table below
for pin definitions.
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table below
for pin definitions.
UID LED
The UID LED is on pins 7 and 8 of JF1. Connect the front panel UID LED to this header to
indicate when the rear UID switch is turned on. Refer to the table below for pin definitions.
NIC1/NIC2 Link LED
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins 11
and 12 of JF1, and the LED connection for LAN Port 2 is on Pins 9 and 10. Attach the NIC
LED cables to display network activity. Refer to the table below for pin definitions.
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Fail LED
Pin Definitions (JF1)
Pin# Definition
5 Vcc
6 Ground
UID LED
Pin Definitions (JF1)
Pin# Definition
7 Vcc
8 Ground
NIC1/NIC2 LED
Pin Definitions (JF1)
Pin# Definition
9/11 Vcc
10/12 Ground
59
Chapter 4: Motherboard Connections