Table of Contents
Advertisement
1. Using a different system, copy the standard BIOS binary image file into the root directory
of a USB flash drive with FAT16 or FAT32 format and rename the file to SUPER.ROM.
Note: If you cannot locate the "SUPER.ROM" file in your driver disk, visit our website at
www.supermicro.com to download the correct BIOS image into a USB flash device and
rename it "SUPER.ROM".
2. While the system is turned off, insert the USB device that contains the new BIOS binary
image (SUPER.ROM).
3. Power on the system.
4. After the system is turned on, the system will enter the BIOS Recovery menu. Select
"Proceed with flash update" to start the BIOS recovery process. DO NOT INTERRUPT
THIS PROCESS UNTIL IT FINISHED!
Appendix C: UEFI BIOS Recovery/IPMI Crash Dump
129
Advertisement
Table of Contents
