Supermicro AS-1114CS-TNR User Manual page 60

A+ Server AS -1114CS-TNR/AS -1114CS-TNR-EU User's Manual
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a hard drive LED cable
here to display disk activity detected on the motherboard's built-in disk controllers. See the
table below for pin definitions.
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin definitions.
NMI Button
The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the
table below for pin definitions.
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 +5V
14 HDD Active
Power LED
Pin Definitions (JF1)
Pin# Definition
15 +5V
16 Ground
NMI Button
Pin Definitions (JF1)
Pin# Definition
19 Control
20 Ground
60