Casio XJ-UT351W User Manual page 9

 Heavy objects
Never place heavy objects on the projector or
climb on top of the projector. Doing so creates
the risk of fire and electric shock.
 Water
Never locate the projector in a bathroom or
anywhere else there is the chance that it will be
splashed with water.
 Unstable location
-
Never place the projector on an
unstable surface or on a high shelf.
Doing so can cause it to fall, creating
the risk of personal injury.
 Using the projector on a base with
casters
Whenever using the projector on a base that has
casters, make sure that you lock the casters
when not moving the base.
 Lightening
During a lightening storm, do not touch the plug
of the projector's power cord.
 Remote controller
!
Never try to take the remote controller
apart or modify it in any way. Doing so
creates the risk of electric shock, burn
injury, and other personal injury. Be sure
to leave all internal inspection,
adjustment, and repair up to your
original dealer or authorized CASIO
service center.
+
Never allow the remote controller to
become wet. Water creates the risk of
fire and electric shock.
 Radio waves emitted by the YW-40
wireless adapter (included or
purchased separately)
-
Never use this product inside of an
aircraft or medical facility, or in any
other location where use of such
devices is prohibited. Radio waves can
have an effect on the operation of
electronic equipment and medical
equipment, and cause accidents.
-
Do not use this product in the vicinity of
high-precision electronic instruments or
electronic devices that handle weak
radio signals. Radio waves can have an
effect on the operation of such
equipment, and cause accidents.
B
• If you are using a pace maker or any other
electronic medical device, be sure to consult
your physician or device manufacturer before
using this product.
 Do not use flammable gas sprays
nearby
-
Do not spray flammable gas into or in
the vicinity of the projector. The gas
may ignite and create the risk of fire.
*
Caution
 Power cord
-
Misuse of the power cord creates the
risk of fire and electric shock. Make
sure that you always observe the
following precautions.
• When unplugging the power cord, always grasp
the plug, and do not pull on the power cord.
• Insert the plug into the power outlet as far as it
will go.
• After using the projector, unplug it from the
power outlet.
• Unplug the projector from the power outlet if
you do not plan to use it for a long time.
• At least once a year, unplug the power plug
and use a dry cloth or vacuum cleaner to clear
dust from the area around the prongs of the
power plug.
• Never use detergent to clean the power cord,
especially the power plug and jack.
• Before moving the projector, be sure to turn it
off and unplug it from the power outlet first.
 Backup of important data
+
Be sure to keep separate written
records of all data stored in projector
memory. Memory data can be lost due
to breakdown, maintenance, etc.
 During projection, make sure there is
nothing in front of the lens blocking
the light.
An object in front of the lens creates the risk of
fire.
 Lens effect
Never have an aquarium or any other object that
produces a lens effect in front of the projector
while the light source unit is on. Such an object
creates the risk of fire.
 Lens
Never touch the lens with your hand.
9