Casio XJ-UT351W User Manual page 36

Use this menu item:
Option Settings 2 3
Audio Out
Option Settings 2 3
Audio Input
Option Settings 2 3
High Altitude
Option Settings 2 3
Control Panel Lock
Option Settings 2 3
Standby RGB/Audio
Option Settings 2 3
Closed Caption (V)
Option Settings 2 3
Timer Function
Option Settings 2 3
Microphone Input Level
Option Settings 2 3
Restore Menu Defaults
To do this:
Use this item to specify whether audio input from the input sources should be output
to the speaker (Speaker*) or output to an external destination from the projector's
AUDIO OUT terminal.
See "Changing the Audio Input" (page 29).
Turn the high-altitude fan speed setting on or off in accordance with the altitude of
the area where you are using the projector.
On: Select this setting when using the projector in a high altitude (1,500 to
3,000 meters / 5,000 to 10,000 feet above sea level) area where air is thin. This
setting increases cooling efficiency.
Off*: Select this setting at normal altitudes (up to 1,500 meters / 5,000 feet).
Important!
 Do not use this projector at altitudes greater than 3,000 meters (10,000 feet)
above sea level.
Disable projector unit key operations.
See "Control Panel Lock" (page 29) for more information.
Specify output of projector image input to the MONITOR OUT terminal and input
audio to the AUDIO OUT terminal while the projector is in standby (projector off with
power being supplied). The output image is fixed as the video signal from the
projector COMPUTER IN 1 terminal. The output audio is the audio signal from the
audio input terminal assigned to "Computer1" of the input source, and the audio
signal from the MIC terminal.
Output: Select this setting to output video and audio signals while the projector is in
standby.
No Output*: Select this setting not to output video and audio signals while the
projector is in standby.
Note
 When "Output" is selected for this setting, audio is output from the AUDIO
OUT terminal during standby, regardless of the projector's current "Option
Settings 2 3 Audio Out" setting.
 The video signal input to the projector's COMPUTER IN 2 terminal cannot
be output from the MONITOR OUT terminal.
Use this item to specify whether to display closed captions when projecting a video
signal that includes them.
Off*: Closed captions not displayed.
CC1, CC2, CC3, CC4: Indicates the current closed caption output setting (CC1,
CC2, CC3, and CC4).
Display the timer function menu. For details, see "Using the Presentation Timer
(TIMER)" (page 30).
Adjusts the volume level of audio input from the MIC terminal within the range of 0*
(mute) to 3 (maximum).
Return all of the items in the "Option Settings 2" main menu to their initial defaults for
the currently projecting image source.
36