6.
Press the [P] key to turn on the projector.
The first time you turn on the projector, a "Language" window will appear in the center of the
projection screen. Select the language you want.
7.
Use the [INPUT] key to select the input source.
"Select the input source (INPUT)" (page 24)
8.
Use the focus lever to adjust the focus.
"General Guide" (page 17)
9.
Perform keystone correction and adjust brightness as required.
"Use manual keystone correction (/) (KEYSTONE)" (page 24), "Light Control" (page 27).
10.
After you finish projecting, press the [P] key to turn off the projector.
Note
This product is also designed for IT power distribution system with phase-to-phase voltage
230V.
General Guide
Exhaust vents (left side)
Intake vents
Security bar
Security lock hole*
*1 The anti-theft lock hole is provided for connection of an anti-theft chain. Visit the Kensington Lock
Website at http://www.kensington.com/ for more information.
Projection lens
Terminals
1
17
Control panel
Remote control signal receiver
Indicators
[P] key
Brightness sensor
Intake vents
AC Terminal
Focus lever