Operation (continued)
OPERATING YOUR FAN AND REMOTE CONTROL
NOTE: The fan will store the last used speed setting for the next time it is turned on.
NOTE: You must turn the fan on prior to using the speed or time functions.
1.
Fan
button. - Press and release the
□
When turned on, the fan will begin spinning using its last speed settings. The remote control's LED bar will display the speed setting
for 5 seconds.
□
When turned off, the fan will stop spinning and the light from the remote control's LED bar will quickly darken from top to bottom.
2.
Speed functions
+
button, increases the fan speed
□
Pressing and releasing the + button one time will increase the speed of the fan. Each setting increase will cause the LED bar to
illuminate slightly more, until the fan has reached the maximum speed setting, at that time the LED bar will be fully illuminated.
□
Pressing and holding the + button will increase the fan speed automatically through the speed settings and the increments will be
denoted on the LED bar. When the LED bar is fully illuminated, the fan has reached maximum speed setting.
□
Pressing the + button while in Comfort Breeze
operation.
–
button, decreases fan speed
□
Pressing and releasing the - button one time will decrease the speed of the fan. Each setting decrease will cause the LED bar to dim
slightly more, until the fan has reached the minimum speed setting. At that time the LED bar will be approximately 25% illuminated.
□
Pressing and holding the - button will decrease the fan speed automatically through the speed settings and the reductions will be
denoted on the LED bar. When the LED bar is 25% illuminated, the fan has reached the minimum speed setting.
□
Pressing the - button while in Comfort Breeze
operation.
3. Comfort Breeze
TM
NOTE: If you are using Comfort Breeze
resume normal fan operation.
There are three Comfort Breeze
slowly from bottom to top to display the current setting.
□
Setting 1: Alternates through speeds 1 – 3, the LED bar should fill approximately 33%.
□
Setting 2: Alternates through speeds 1 – 6, the LED bar should fill approximately 66%.
□
Setting 3: Alternates through speeds 1 – 9, the LED bar should be fully illuminated.
Off
Setting 1
button to turn the fan on or off.
TM
mode will automatically cancel the Comfort Breeze
TM
mode will automatically cancel the Comfort Breeze
TM
mode, pressing the
TM
settings. Pressing the
Setting 2
button or the fan speed buttons will cancel Comfort Breeze
button will activate the Comfort Breeze
Setting 3
17
Please contact 1-800-986-3460 for further assistance.
TM
mode and resume normal fan
TM
mode and resume normal fan
TM
mode and
TM
mode and the LED bar will illuminate
Disable Comfort Breeze
HOMEDEPOT.COM/HOMEDECORATORS
TM
Need help?
Do you have a question about the FENCEHAM and is the answer not in the manual?