Do you have a question about the Brette AM382A-BN and is the answer not in the manual?
Questions and answers
Chris Chris Malet
April 29, 2025
Lights don't get bright
1 comments:
Mr. Anderson
May 15, 2025
The lights may not be getting bright because the dimming function only works when the receiver is installed and the remote is used. Wall slide controls used to bypass the remote cannot dim the light.
This answer is automatically generated
Marzena
January 18, 2025
Who sells replacement parts for this ****?? I need some screws, mounting bracket, canopy, hanger ball down. Thanks
1 comments:
Mr. Anderson
February 4, 2025
Replacement parts like screws, mounting bracket, canopy, and hanger ball for the Home Decorators Collection Brette AM382A-BN can be obtained by contacting Home Decorators Collection Customer Service. You can reach them at 1-800-986-3460, Monday-Friday from 8 a.m. to 7 p.m. EST, and Saturday from 9 a.m. to 6 p.m. EST. You can also visit their website at HOMEDEPOT.COM/HOMEDECORATORS for further assistance.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Home Decorators Collection Brette AM382A-BN
Summary of Contents for Home Decorators Collection Brette AM382A-BN
Page 1
USE AND CARE GUIDE BRETTE 23 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS...
Table of Contents Table of Contents ............Disassembling Your Fan ..........Safety Information ............Operation ..............Remote Control Operating Instructions ........Warranty ................. Installing the Remote Control Holder ........Reverse Switch Operating Instructions ........Pre-installation .............. Specifications ................Care and Cleaning ............Tools Required .................
Safety Information To reduce the risk of electric shock, ensure electricity has However, there is no guarantee that interference will not occur been turned off at the circuit breaker or fuse box before in a particular installation. If this equipment does cause harmful beginning.
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below. Part Part Description Description Quantity Quantity Plastic wire nut (not to scale) Canopy mounting screw with lock washer (preassembled) Remote control holder mounting screw (not to scale) Remote control holder plug (preassembled) Clevis pin (preassembled) Cotter pin (preassembled)
Pre-Installation (continued) PACKAGE CONTENTS PACKAGE CONTENTS Part Part Description Description Quantity Quantity Part Part Description Description Quantity Quantity Mounting bracket (preassembled) Blade (preassembled) Canopy ring (preassembled) Guard (preassembled) Canopy Receiver Hanger ball/downrod assembly Remote control Coupling cover Remote control holder Fan motor assembly...
Installation MOUNTING OPTIONS MOUNTING OPTIONS NOTE: WARNING: You may need a longer downrod to maintain proper To reduce the risk of fire, electric shock, or blade clearance when installing on a steep, sloped ceiling. personal injury, mount the fan to an outlet box marked The maximum angle allowable is 18°...
Assembly Preparing the canopy Preparing the motor □ □ Remove the cotter pin (FF) and clevis pin (EE), and Remove the canopy ring (B) from the canopy (C). loosen the two collar setscrews (II) from the motor collar. □ Remove the two non-slotted canopy mounting screw with lock washer (BB) from the canopy (C), and loosen □...
Assembly — Hanging the Fan Hanging the fan to the mounting Installing the mounting bracket bracket to the electrical box WARNING: To reduce the risk of fire, electric shock or WARNING: The tab in the ring must rest in the groove of other personal injury, mount the fan only to an outlet box or the hanger ball/downrod assembly (D).
Page 10
Assembly — Hanging the Fan (continued) Preparing the receiver and remote control WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. CAUTION: Do not use with a wall light dimmer switch. If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
Page 11
Assembly — Hanging the Fan (continued) □ If your outlet box (LL) has a ground wire (green Making the electrical connections or bare copper) connect it to the fan ground wires; otherwise connect the hanger ball/downrod assembly (D) ground wire to the mounting bracket (A). WARNING: Check to see that all connections are tight, □...
Page 12
Assembly — Hanging the Fan (continued) Installing the canopy WARNING: Make sure the tab on the mounting bracket (A) properly sits in the groove in the hanger ball/downrod assembly (D) before attaching the canopy (C) to the mounting bracket (A) by turning the canopy (C) until it drops into place. WARNING: The locking slots of the canopy (C) are provided only as an aid to mounting.
Disassembling Your Fan This fan comes with a pre-assembled guard (H) and blade (G) for your easy installation. Check that all screws are tight and securely in place. If you need to disassemble the fan for any reason such as cleaning, follow these steps below: □...
Operation REMOTE CONTROL OPERATING INSTRUCTIONS REMOTE CONTROL OPERATING INSTRUCTIONS □ Install the 12V MN21/A23 battery (JJ) (included) into the remote control (J). To prevent damage to the remote control (J), remove the battery if not used for long periods. □ Restore power to the ceiling fan and test for proper operation. HI, MED, LOW buttons: set the fan speed.
Operation (continued) REVERSE SWITCH OPERATING INSTRUCTIONS REVERSE SWITCH OPERATING INSTRUCTIONS The reverse switch is located on the top of the motor housing. Slide the switch to the right for warm weather operation. Slide the switch to the left for cool weather operation. NOTE: Wait for the fan to stop before reversing the direction of the blade rotation.
Troubleshooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Refer to step 7 “Making the electrical connections” on page 11. Problem Problem Solution Solution □ Check the main and branch circuit fuses or breakers. □...
Service Parts Part Part Description Description Part Part Description Description Mounting bracket (preassembled) Plastic wire nut Canopy ring (preassembled) Canopy mounting screw with lock washer Canopy (preassembled) Hanger ball/downrod assembly Remote control holder mounting screw Coupling cover Remote control holder plug (preassembled) Fan motor assembly Clevis pin (preassembled) Blade (preassembled)
Page 18
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use. AM382A002-A...
Need help?
Do you have a question about the Brette AM382A-BN and is the answer not in the manual?
Questions and answers
Lights don't get bright
The lights may not be getting bright because the dimming function only works when the receiver is installed and the remote is used. Wall slide controls used to bypass the remote cannot dim the light.
This answer is automatically generated
Who sells replacement parts for this ****?? I need some screws, mounting bracket, canopy, hanger ball down. Thanks
Replacement parts like screws, mounting bracket, canopy, and hanger ball for the Home Decorators Collection Brette AM382A-BN can be obtained by contacting Home Decorators Collection Customer Service. You can reach them at 1-800-986-3460, Monday-Friday from 8 a.m. to 7 p.m. EST, and Saturday from 9 a.m. to 6 p.m. EST. You can also visit their website at HOMEDEPOT.COM/HOMEDECORATORS for further assistance.
This answer is automatically generated