Advertisement
Chapter 10 Disassembly and Reassembly
~3-:..D~is;:::a::;;s;;;;se~m=bl:::Y..:::an;;;d:;..:.R;.;e;;;a;;.ss;.;e;.;m=bl;,;Y _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.4]H3(B)(C)E
3-2.29 Mounting the lube oil pipe
(1) Mount the lube Oil pipe (filter-lube oil cooler, lube oil
cooler-filter).
(2) Mount the lube oil pipe (cylinder block-fuel injection
pump).
3-2.30 Mounting the dipstick guide
Mount the dipstick and dipstick guide.
Lube oil dip stick
3-2.31 Mounting the sea water pump
(1) Mount the sea water pump assembly to the gear case
flange.
(2) Lightly tap the gear case side bearing rest with a wood
hammer, and tighten the mounting bolts.
Sea water pump
Gasket packing
Gear case flange
•
•
J
Gear case
'
: • J
/
3-2.32 Mounting the cooling sea water pipe
Mount the cooling water pipe with the hose clamp (sea
water pump-lube oil cooler).
Printed in Japan
IIINSHI-H8009
10-31
,~
~
Lube 011 cooler
Cooling water (sea water) pipe
3-2.33 Mounting the heal exchanger
(exhaust martifotd, fresh water tank urdt).
Mount the gasket packing and exhaust manifold.
Heat exchanger
Gasket packing
Cylinder head
3-2.34 Mounting the cooling water pipe
(1) Mount the coolirg fresh water pipe with the hose clamp
(fresh water tank-fresh water pump, fresh water pump
heat excharger).
(2) Mount the cooling sea water pipe with tbe hose clamp
(lube oil cooler-heat exchanger).
(3) Mount the cooling sea water pipe with the hose clamp
(lube oil cooler-marine gearbox).
Cooling water (sea water) pipe
Heat exchanger
Cooling water
.:--;,-_-.s'?,(fresh water) pipe
Advertisement
Chapters
Troubleshooting
