Yanmar 3JH3E Service Manual page 197

Chapter 9 Electrical System
.;;..3-~S;.;t~a.;;..rt;.;;.e.;;..r.;.M~ot;.;;.o.;;..r _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3,4JH3(B)(C)E
1) The Magnetic switch's 8 mm nut
Remove the magnetic switch's 8 mm nut
and disconnect the connecting wire.
2) The 6 mm Bolts (2)
3) Magnetic Switch
The Magnetic Switch can be disassembled once the
6 mm Bolts are reamoved.
4) The 4 mm Screws (2)
5) The 5 mm Through Bolts (2)
6) The Rear Cover
The Rear Cover is disassembled by removing the 4 mm
screws and the 5 mm through bolts.
7) Thrust Washer
The Thrust Washer is removed with a standard screwdriver.
4
/L
~
9-12
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Printed in Japan
HINSHl-H8009