Chapter 7 Reduction and Reversing Gear
,::2·:..;S~h:.:,:i::,:ft~in~g~D~e.,;.;v1:;·c;,:;;,e _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3,4JH3(B)(C)E
2-4 Clutch shifting force
\ Shifting position
Shift lever posi-
Remote control handle
postition
at 170mm
shifting direction\
lion at 56mm
(Cable length,
4m)
Engaging force
3~4kg
4~5kg
at 1000rpm
Disengaging force
3.5~5 kg
4~6 kg
at 1000rpm
2-5
Adjustment of shifting device
Whenever the side cover, shift lever shaft, shifter, stopper
bolt or drive cone is replaced.be sure to adjust the clear-
ance between the shitter end and the stopper bolt
by
using shims. When the adjustment of this clearance is
not proper the drive cone may be properly fitted When the
shift lever is moved to the neutral position either from the
forward or reverse position.
Printed in ]ap,m
HINSH1-H8009
7-37
ll'l
(0
\
Shifter top clesrance
'
lR
Neutral
j
Forward
Forward Side
Reverse side