Supply Clutch Lube Oil; Supply Cooling Water - Yanmar 3JH3(8)E Operation Manual

3.
Operation
NOTICE
Do not overfill.
Overfilling will cause oil to be
sprayed out from breather and
lead to engine problems.
CD
Filler port
@Bonnet
@ Dipstick
®
Lower limit
@ Upper limit
3.2.3 Supply Clutch Lube Oil
1. Remove the filler port cap at the top of
the bonnet, and fill with marine gear-
clutch- lube oil.
2. Fill with oil to the upper limit on the
dipstick. Insert the dipstick fully to
check the level.
3. Tighten the filler port cap securely by
hand.
Marine gear oil capacity
KM3P
KM3A
22
Full 0.35
e /
Effective 0.05
e
Full 0.45
e /
Effective 0.05
e
CD
Oil filler port cap @Dipstick
@ Upper limit/Lower limit
3.2.4 Supply Cooling Water
Supply cooling water according to the
following procedures. Be sure to add
antirust or antifreeze to the cooling water.
1. Be sure to close the 3 water drain
cocks.
Fresh
Seawater
Model water line line
3JH3(B)E 3 1
4JH3(B)E 3 1
Note: The water drain cocks are opened
before shipping from the plant.
2. Remove the filler cap of the fresh water
cooler by turning the cap counterclock-
wise 1/3 of a turn.
CD
Filler cap
@Dents
@ Fresh water cooler
@Notches