ZOLL AutoPulse NXT User Manual page 43

Chapter 7. Using the System
6. Place the long side of band on the patient's chest with the yellow line aligned with the patient's armpits.
7. Place the short side of the band on top of the long side of band.
8. Line up the edges of the blue lines on the long and short sides of the band. Press firmly to attach.
Press Start. The system analyzes the patient's chest size and begins compressions.
Caution. Before compressions begin, make sure that the band is not twisted.
WARNING. Failure to correctly position the patient on the platform may cause injury to the patient.
WARNING. Do not touch the patient while the system is analyzing the patient's size.
WARNING. Press Stop to pause compressions before moving or realigning the patient. Press Start to con-
tinue compressions.
WARNING. Do not place a strap across or otherwise constrain the movement of the band.
WARNING. Check the patient's chest rise while ventilating during system operation.
38 www.zoll.com