Table of Contents
Advertisement
OPERATION
3.13.2 MACHINES EQUIPPED WITH "KMG" CONTROL SYSTEM
NOTICE
The illustrations show a typical construction of control stand
and working attachment.
However, the shown operation - and working movements
apply to this machine.
BACKHOE
L.H. control lever (1)
A
Lowering boom
B
Lifting boom
Filling bucket
C
(roll back)
Emptying bucket
D
(roll forward)
FACE SHOVEL
L.H. control lever (1)
A
Lowering boom
B
Lifting boom
Emptying bucket
C
(roll back)
Filling bucket
D
(roll forward)
NOTICE
The raised working attachment can also be lowered with the
engine at standstill. If, for example, the engine stalls with the
working attachment in a raised position, lowering of the
working attachment is possible by moving control lever (1) to
position (A). The necessary oil pressure for shifting the
spools of the main control valves is provided by a pressure
accumulator in the pilot oil circuit. After stopping the engine,
relieve the pressure in the hydraulic system.
For more information → See "STOPPING THE ENGINES"
on page 264.
R.H. control lever (2)
E
Extending stick
F
Retracting stick
R.H. control lever (2)
E
Extending stick
F
Retracting stick
3.13 WORKING WITH THE ATTACHMENT
253
Advertisement
Table of Contents
