Table of Contents
Advertisement
MAINTENANCE
Brake Housing - Change Oil (Siebenhaar)
1. Remove level gauge (8), illustration Z24091, drain plug (9)
and breather filter (7). Drain the oil into a receptacle of
approx. 5 liter capacity.
2. Clean breather filter (7) with compressed air from inside to
outside and re-install.
3. Install drain plug (9) and fill-up engine oil SAE 10 or hydraulic
oil HLP 22 or HLP 32 through filler opening up to the "MAX"
mark on level gauge (8) and install the level gauge.
4. After short operating period check oil level and housing for
leaks.
NOTICE
Be sure to fill the brake housing and motor adapter housing
with engine oil or hydraulic oil as specified on page 311.
Motor Adapter Housing - Change Oil
1. Remove level gauge (6) and drain plug (5). Drain the oil into a
receptacle of approx. 5 liter capacity.
2. Install drain plug (5) and fill-up engine oil SAE 10 or hydraulic
oil HLP 22 or HLP 32 through filler opening up to the "MAX"
mark on level gauge (6) and install the level gauge.
3. After short operating period check oil level and housing for
leaks.
4.14 EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR
511
Advertisement
Table of Contents
