Before First Use - Parkside PLDM A1 Operation And Safety Notes

Clean the contacts on the battery and
in the battery compartment before
inserting!
Remove exhausted batteries/rechargeable
batteries from the product immediately .
˜ Before first use
˜ Insert/replace battery
NOTES:
If (low battery indicator) flashes steadily on the
o
display 2 , the battery (button cell) is low and must be
replaced immediately .
When changing the battery, the display may
o
experience faults . Remove the battery from the battery
compartment
battery again into the battery compartment .
1 . Rotate the lid in the arrow direction shown on the lid to
open the battery compartment .
2 . Open the lid of the battery compartment (Fig . B) .
3 . Remove the old battery .
18 GB
. Wait for approx . 30 seconds . Insert the
6 ] [