Before Using; Inserting / Replacing The Batteries - Parkside PLEM 50 B2 Operation And Safety Notes

Remove batteries / rechargeable batteries if the product will
not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity
marks (+) and (-) on the battery / rechargeable battery and
the product.
Clean the contacts on the battery / rechargeable battery and
in the battery compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the
product immediately.

Before using


Check the consignment for completeness and for signs of
visible damage.
Remove all packaging material from the product.

Inserting / replacing the batteries

When the low battery icon
still make measurements. As soon as the battery icon turns empty
, however, you must replace the batteries. Measurements are
no longer possible.
Open the battery compartment cover
down the battery compartment cover latch
14 GB
appears in the display
by gently pushing
5b
, you can
2
.
32