Component Illustration - Becker O 5.10 Operating Instructions Manual

14 | O 5.10, O 5.16, O 5.21, O 5.25, U 5.40
4.4

COMPONENT ILLUSTRATION

O 5.10, O 5.16, O 5.21, O 5.25, U 5.40, U 5.40 XL
Position Component
1 Motor
2 Terminal box
3 Screw plugs
4 Oil cooler
5 Oil reservoir
6 Pump unit
Connection flange incl. non-
7
return valve
8 Motor nameplate
9 Transport device
10 Type shield
11 Screw plug
12 Oil sight glass
13 Maintenance cover
14 Gasballastventil
15 Unit foot / rubber buffer
Table 4.4: Component illustration 1
Function
Drive
Electrical connection for customers
Oil filler plug(s)
Temperature reduction
Oil reservoir includes oil tank, oil filler plug, oil sight glass, oil drain
plug and oil separator (air oil separator)
Generation of the vacuum; the pump unit includes pump housing,
piston and slide valve
Suction connection, prevention of backflow of process air / oil into
application
Marking of conformity and technical data - Motor
Anchor point
Marking of conformity and technical data - Pump
Oil drain plug
Oil level indicator
Gas outlet, access to air oil separator (optionally with exhaust air
connection)
Improvement of the water vapour compatibility
Stable installation and fastening of the pump