Component Illustration - Becker T 4.10 Operating Instructions Manual

13 | T 4.10, T 4.16, T 4.25, T 4.40, X 4.10, X 4.16, X 4.25, X 4.40
4.4

COMPONENT ILLUSTRATION

T 4.10 DV, T 4.16 DV, T 4.25 DV, T 4.40 DV, X 4.10 DV, X 4.16 DV, X 4.25 DV, X 4.40 DV
Position Component
1 Outlet (variants with cooler)
2 Device cover
3 Admission
4 Eyebolt
Outlet (variants without
5
radiator)
6 Pump unit
7 Slider
8 Side cover
9 Filter group
10 Device cover
11 Vacuum regulating valve
Terminal box with motor type
12
plate
13 Motor
14 Unit base
15 Device type plate
16 Pressure regulating valve
Table 4.4: Component illustration 1
Function
Connection of the pressure line
Flow optimisation, noise reduction
Connection of the vacuum line
Anchor point
Connection of the pressure line
The pump unit includes pump housing, piston and slide valve
Forms the compression chambers
Lateral closure of the pump casing
Air filtration
Flow optimisation, noise reduction
Setting the required vacuum
Electrical connection; conformity mark and technical data - Motor
Drive
Stable installation and fastening of the pump
Marking of conformity and technical data - Pump
Setting the required pressure