Component Illustration - Becker VX 4.25 Translation Of The Operating Instructions

14 | VT 4.10, VT 4.16, VT 4.25, VT 4.40, VX 4.10, VX 4.16, VX 4.25, VX 4.40
4.4

COMPONENT ILLUSTRATION

VT 4.10, VT 4.16, VT 4.25, VT 4.40, VX 4.10, VX 4.16, VX 4.25, VX 4.40
Position Component
1 Admission
2 Device cover
3 Pump unit
4 Eyebolt
5 Slider
6 Side cover
7 C separator cartridge
8 Intake filter
Terminal box with motor type
9
plate
10 Device cover
11 Vacuum regulating valve
12 Motor
13 Unit base
14 Device type plate
15 Abblaseventil
Table 4.4: Component illustration 1
Function
Connection of the vacuum line
Flow optimisation, noise reduction
The pump unit includes pump housing, piston and slide valve
Anchor point
Forms the compression chambers
Lateral closure of the pump casing
Optionally, a further filter cartridge can be installed, which
additionally filters the carbon abrasion of the sliders from the
exhaust air.
Filtering of the evacuated intake air (exception VX 4.25/0-47).
Electrical connection Conformity mark and technical data - Motor
Flow optimisation, noise reduction
Setting the required vacuum
Drive
Stable installation and fastening of the pump
Marking of conformity and technical data - Pump
Evacuated air outlet, vacuum safety device