Safety Warnings And Guidelines - Monoprice 10320 User Manual

3g sdi 4x1 switch
Table of Contents

Advertisement

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these safety warnings
and guidelines. Please keep this manual in a safe place for future reference.
This switch is intended for indoor use only.
Do not expose this switch to water or moisture of any kind. Do not place drinks or other
containers with moisture on or near the device. If moisture does get in or on the device,
immediately unplug it from the power source and allow it to fully dry before reapplying power.
Do not touch the unit or any of its connected cables with wet hands.
Do not expose the unit to excessively high temperatures. Do not place it in, on, or near heat
sources, like a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
Do not place or install the unit in an area where it can be exposed to excessive amounts of dust,
humidity, oil, smoke, or combustible vapors.
Check this switch first for physical damage. Do not attempt in using it if there is physical damage.
Before plugging this switch into a power outlet, make sure that the outlet has the same type and
required power level.
Before plugging this switch into a power outlet, make sure that the outlet provides the same
type and required power level.
Handle with care to prevent damage to the power cord. Do not allow it to become crimped,
pinched, walked on, or become tangled with other cords.
Never unplug by pulling on the power cord. Always grasp the connector head or adapter body.
Ensure that power is turned off and disconnected before making any electrical connections.
Do not use chemical cleaners or solvents to clean this switch. Use only a soft cloth moistened
with warm water.
This switch has no user-serviceable parts. Do not attempt to open, service, or modify it.
2

Advertisement

Table of Contents
loading

Table of Contents