Page 3
Page Section 1: Introduction Thank you for choosing the Tuttnauer T-Classic Together with this unit and operating manual, you will find Autoclave. the following: After removing the device from the box, please check for • Instrument furniture any transit damage, if damage to the devices found, •...
Page 4
The re will be a visual and audible release of steam plug into a GROUNDED main electrical socket of the from the rear of the Steam Duct. CORRECT voltage. Lights: (L1) illuminates GREEN. If this flashes continuously, then there is an error, and you should contact Tuttnauer for further assistance.
Page 5
To ensure your autoclave gives you the years of service for which it was designed, it is important to remember a few “Do’s” and “Don’ts” with regards to the operation of the unit and follow simple care and maintenance procedures: The unit is in a “draft free”...
Page 6
If a new gasket leaks, or if a persistent leak develops, gently clean the sealing surface of both the lid and body of the unit with a light nylon pan scorer, making sure you do not remove any metal. Rinse both surfaces, but do not dry.
Page 8
This device is covered under Tuttnauer warranty for 1 year - parts and labor Tuttnauer is not liable if the device has been misused or in the event operator did not adhere to the instructions enclosed or if the autoclave has been mishandled, interfered with, altered, repaired or serviced by any unauthorized party.
Need help?
Do you have a question about the T-Classic and is the answer not in the manual?
Questions and answers