Table of Contents
Advertisement
13. Do not step on the projector or place any
objects upon it. Besides probable
physical damage to the projector, doing
so may result in accidents and possible
injury.
14. Do not place liquids near or on the
projector. Liquids spilled into the
projector may cause it to fail. If the
projector does become wet, disconnect
it from the power supply's power outlet
and call BenQ to have the projector
serviced.
15. This product is capable of displaying
inverted images for ceiling mount
installation.
16. This apparatus must be earthed.
17. When the projector is under operation,
you may sense some heated air and
odor from its ventilation grill. It is a
normal phenomenon and not a product
defect.
6
Important safety instructions
18. Do not place this projector in any of the
following environments.
- Space that is poorly ventilated or confined.
Allow at least 50 cm clearance from walls
and free flow of air around the projector.
- Locations where temperatures may
become excessively high, such as the
inside of a car with all windows rolled up.
- Locations where excessive humidity, dust,
or cigarette smoke may contaminate
optical components, shorten the
projector's life span and darken the image.
- Locations near fire alarms
- Locations with an ambient temperature
above 40°C / 104°F
- Locations where the altitudes are higher
than 3000 m (10000 feet).
Risk Group 2
1. According to the classification of
photobiological safety of light source
and light source systems, this product is
Risk Group 2, IEC 62471-5:2015.
2. Possibly hazardous optical radiation
emitted from this product.
3. Do not stare at operating light source.
May be harmful to the eyes.
4. As with any bright source, do not stare
into the direct beam.
To avoid damaging the DLP chips, never aim a
high-power laser beam into the projection lens.
Advertisement
Table of Contents
