BenQ x3100i User Manual page 37

Mode Settings
(Continued)
Details
Adjustment
FPS Crosshair
Digital Zoom
Auto Game Mode
6. Press / / / to select a desired characters, and press OK to
confirm the selection. Repeat this step until all the characters are
being input.
7. Press BACK/
8. Press BACK/
Adjusts the level of detail clarity. The higher the effect, the more details will
be shown but with lower black performance.
If you need to display a crosshair on the screen for aiming at targets, follow
the instructions below.
1. Press OK to display the FPS Crosshair page.
2. Press OK repeatedly to select a preferred crosshair type. Selecting
will not display a crosshair when you leave this page.
3. Press / / / to move the crosshair to a desired position.
4. To return to the default position, press BACK/
5. When all the adjustments are done, press BACK/
changes and the crosshair will be displayed on the screen.
When the crosshair is no longer needed:
1. Go back to this the FPS Crosshair page.
2. Press OK repeatedly to select the crosshair type
BACK/ to save and leave the page.
Scales down the projection area within the range of 100% to 80% to adjust
the size of the displayed image. 100% represents the original size of the
image, and 80% represents a 20% reduction in size.
This image adjustment might impact latency. We suggest setting the
Digital Zoom values to 100% (the original size) to enjoy low latency
gaming.
When a gaming console is connected and detected, the projector
automatically selects a suitable Picture Mode for the type of input source
to ensure the lowest possible input lag. If you switch back to other input
sources, the projector will also revert to the previously selected picture
mode, providing a seamless transition between gaming and other
entertainment activities.
Selecting Reset will return all the customized settings under Game
Settings (e.g. Picture Mode, Details Adjustment, FPS, etc.) to the factory
default values.
and to highlight Commit, and press OK.
to save the change and exit.
for two seconds.
to save the
, and press
Menu operation 37