Table of Contents
Advertisement
Quick Links
DLP PROJECTOR
SL 705X/S
USER'S MANUAL
Thank you for purchasing the Benq DLP Projector.
Please read this user's guide to ensure correct use of the device. Save this user's
guide for future reference.
OUTLINE
This DLP Projector can display various computer signals and NTSC/PAL/SECAM video
signals.
FEATURES
1. High Brightness
2. High Resolution
3. Compact Size, Feather Weight for
Portability
4. Durable Magnesium Alloy Body
5. RGB Input Terminal
6. One Touch Auto-Adjustment Function
7. Easy Keystone Adjustment
Advertisement
Table of Contents
Related Manuals for BenQ SL 705X/S
Summary of Contents for BenQ SL 705X/S
- Page 1 DLP PROJECTOR SL 705X/S USER’S MANUAL Thank you for purchasing the Benq DLP Projector. Please read this user’s guide to ensure correct use of the device. Save this user’s guide for future reference. OUTLINE This DLP Projector can display various computer signals and NTSC/PAL/SECAM video signals.
- Page 2 Furthermore, Benq Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of Benq Corporation to notify any person of such revision or changes.
-
Page 4: Table Of Contents
Projector Description ........ - Page 5 Projector Specifications ........25...
-
Page 6: Introduction
ATE YOUR PROJECTOR. SAVE THIS USER’S GUIDE FOR FUTURE REF- ERENCE . Safety Instructions Read this user’s guide before you operate your projector and save it for future reference. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. -
Page 7: Warranty
In the event this product is found to be defective within the warranty period, Benq’s only obligation and your exclusive remedy shall be replacement of any defec- tive parts (labor included). To obtain warranty service, notify the dealer immediately from which you purchased the product of any defects. -
Page 8: Shipping Contents
Shipping Contents The Projector is shipped with the necessary cables required for standard PC or laptop computer connections. Carefully unpack and verify that you have all the items shown below. If any of these items are missing, please contact your place of purchase. -
Page 9: Projector Description
Benq Corporation Projector Description Projector External control panel (see next page) Projection lens Front adjustment feet IR remote sensor Ventilation grill Kensington lock AC power cord input S-video connector Introduction Video connector 10. D-sub connector (for computer/ HDTV input) 11. Audio input 12. -
Page 10: External Control Panel
See “Lamp Information” on page 19. for more detailed information. • When the projector is on, Back-lit Power will blink during warm-up and turn to solid green to indicate the projector is ready for use. • Press Power for 1 second to turn the projector on or off. -
Page 11: Adjuster
Benq Corporation Adjuster The projector is equipped with a quick-release adjuster foot and button for adjusting its tilt angle. Lift the projector up and press the adjuster button to release the adjuster. The adjuster will drop into position and be locked. -
Page 12: Remote Control Description
User’s Manual Remote Control Description Remote Control Features The remote control sensors are located in the front/ back of the projector. The distance between the sensor and the remote control should not exceed 6 meters. Introduction... - Page 13 Benq Corporation FREEZE The image can be frozen when FREEZE is pressed. A “Pause” icon will appear in the lower right corner of the screen for three seconds. To release the freeze function, press the FREEZE button, RETURN button or SOURCE button (when the input source is switched over during display) again.
-
Page 14: Installing Or Replacing Batteries
Installing or Replacing Batteries • Push and slide the battery compartment lid in the direction shown. • Install a battery as indicated by the diagram inside the compartment. • Position the lid over the compartment and snap it back into place. Caution Avoid excessive heat and humidity. -
Page 15: Installation
Benq Corporation INSTALLATION Screen Size Place the projector at the required distance from the screen according to the desired picture size (see the table below). Screen Size (Max.) Diagnal A. Width (cm) 30.4 61.8 60.8 123.65 91.2 185.3 121.5 247.0 151.9... -
Page 16: Operation
• The back-lit POWER key blinks green and stays green when the power is turned (When the power is turned off, there is a 60-second cooling period before the projector can be re-started.) Switch on all connected equipment. Projector Power User’s Manual... -
Page 17: Digital Keystone Correction
In some cases, you may have to optimize the picture quality manually. To do this, press the AUTO key on the control panel of the projector or on the remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust to the best picture quality. -
Page 18: Source Selection
Source Selection When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control. Projector Auto Source Menu System Press Menu for the main menu and press again to select items in the sub-menu. -
Page 19: Display Menu
Benq Corporation 1. Display Menu Corrects the keystone of the image. Keystone Adjusts the brightness of image. Brightness Adjusts the degree of difference between darkness and lightness of image. Contrast Adjusts to fit in the desired image size. Phase *This function is not available when the input modes are Video, S- Video. -
Page 20: Image Menu
User’s Manual 2. Image Menu Makes the best fit of the image to the screen, Auto resize Adjusts the horizontal position of image. H-position Adjusts the vertical positon of image. V-position Adjusts the color temperature to fit your preference. Color Temp. Shows the current resolution. -
Page 21: Source Menu
Benq Corporation 3. Source Menu Mirror Default Ceiling - mounted projection Rear screen projection Ceiling - mounted and rear screen projection Source Volume Treble Bass Mute Operation Selects sources between PC, Video, S-Video, and YPbPr. Adjusts the volume level. Adjusts the treble level. -
Page 22: Control Menu
4.Control Menu Language OSD Time Auto Off Reset Lamp hour 5. PIP Menu These functions are valid only when the input mode is PC and the PIP source is Video or S-Video. Selects the source from which the PIP picture comes. PIP Source Uses 3 / 4 key to scroll through the 4 alternatives: Off, PIP Size... -
Page 23: Shutdown
Benq Corporation Shutdown Press POWER and a warning message will prompt up. To turn off the projector, Press POWER again. The fan will continue to run for approximately 60 seconds. Disconnect the power cord from the wall socket. Caution Please do not unplug the power cord before POWER is shut down or during the 60-second cooling process. -
Page 24: Maintenance
The LAMP indicator will light up if the lamp becomes too hot. Turn off the power and let the projector cool for 45 minutes. If the LAMP indicator is still red when turning the power on, please contact your dealer. - Page 25 If you touch the optical parts inside, this could cause color unevenness. Replace the lamp with a new one. Insert it into the projector, and tighten the screws firmly. Loose screws may cause a bad connection, which may result in malfunction.
-
Page 26: Resetting Lamp Hours
Caution To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp. To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered into sharp pieces. -
Page 27: Service Information
Compact leather case ........98.J1904.001 Ordering Parts or Getting Information For product information, product assistance, service information, or to order accessories, please contact Benq corporation at http://www.benq.com. Maintenance... -
Page 28: Troubleshooting
Use the Keystone correction key on the control panel of the projector or the remote control unit. Select the correct video system. Adjust brightness, contrast, or saturation. Press Auto on the control panel of the projector or the remote control unit to get better picture quality. Adjust the focus. -
Page 29: Status Messages
CHANGE THE LAMP! Troubleshooting Description Projector is searching for input. Projector has identified the input signal and is running the auto image adjustment function. Input signal frequency exceeds the projector’s. The lamp has been in operation for 1400 hours. Lamp replace- ment is recommended. -
Page 30: Specifications
SPECIFICATIONS Projector Specifications Technical Specifications Note: All specifications are subject to change without notice. General Product name Model name Optical Display system Lens F/Number Lamp Electrical Power supply Power consumption Mechanical Dimensions Operating Temperature range Weight Input terminal Computer Input... -
Page 31: Timing Chart
Benq Corporation Timing Chart Resolution 640x350 640x400 720x400 720x400 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1280x1024 Specifications H Sync (kHz) V Sync (Hz) 31.5 37.9 31.5 37.9 31.5 37.9 43.3 35.2 37.9 46.9... -
Page 32: Dimensions
User’s Manual DIMENSIONS 220 mm 175 mm 52 mm Dimensions...
Need help?
Do you have a question about the SL 705X/S and is the answer not in the manual?
Questions and answers