OPERATE YOUR PROJECTOR. SAVE THIS USER’S MANUAL FOR FUTURE REFERENCE . Safety Instructions Read this user’s manual before you operate your projector and save it for future reference. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Shipping Contents The projector is shipped with the cables required for connection to standard PC or laptop computers. Carefully unpack and verify that you have all the items shown below. If any of these items are missing, please contact personnel at the place of purchase.
Ventilation grill Speaker Projection lens adjuster RGB (PC/ Mac) signal input - 1 RGB (PC/ YP Video connector BenQ PB7200/ PB7220/ PB7100 User’s Manual signal input Audio jack USB mouse connector S-Video jack RS 232 control port AC power cord inlet...
BenQ PB7200/ PB7220/ PB7100 User’s Manual External Control Panel Power Presses the Power key to turn the projector on or off. Source Selects signal sources from among RGB- 1, RGB-2, YP Left Menu will display the menu system on screen. Press Menu again to access the sub-menus.
Adjuster The projector is equipped with 1 quick-release adjuster foot. Push the button to adjust its tilt angle. Lift the projector up and press the adjuster button to release the adjuster. The adjuster will drop into position and be locked.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Remote Control Description Power Menu 3 Left/ Keystone - 4 Right/ Keystone + Auto L-Click/ R-click Zoom in/ out By pressing ZOOM IN +, the center of the picture will be magnified. When the + button is pressed again, the picture is further magnified, up to four times the original size.
Remote Control Effective Range The remote sensors are located on the front and the back of the projector. It can function in a range of 30 degrees horizontally and 30 degrees vertically relative to a line that is a right angle to the remote sensors. The distance between the remote control and the remote sensors must be shorter than 6 meters (19.5 feet).
BenQ PB7200/ PB7220/ PB7100 User’s Manual INSTALLATION Screen Size Place the projector at the required distance from the screen according to the desired picture size (see the table below). • PB7200/ PB7220 (XGA) screen size chart Distance from screen feet...
13.70 164.3 16.77 14.67 176.1 17.97 15.65 187.8 19.17 Connecting to Various Equipment HDTV Equipment The projector is capable of displaying various High Definition TV display modes. Some of these sources are: • Digital-VHS (D-VHS) player • Satellite Dish HDTV receiver...
BenQ PB7200/ PB7220/ PB7100 User’s Manual Connecting to Various Equipment It only takes a few seconds to connect your projector to your desktop or notebook computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is needed for connection to Macintosh computers.
Page 15
BenQ PB7200/ PB7220/ PB7100 User’s Manual Video device or VCR Installation...
BenQ PB7200/ PB7220/ PB7100 User’s Manual OPERATION Start Up Plug the power cord into the projector and into a wall socket. Turn on the main power switch. Press and hold POWER to start the unit. The back-lit POWER key flashes green and stays green when the power is turned on.
In some cases, you may need to optimize the picture quality. To do this, press the AUTO key on the control panel of the projector or on the remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust settings to provide the best picture quality.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Source Selection When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control. Projector Blank Uses Blank to hide the screen image. You can unseal the image gradually by using the mouse of the remote control, or simply press Blank to turn on the image immediately.
Display Keystone Brightness Contrast Phase H Size Y/Pb/Pr Keystone Brightness Video Contrast Color Tint S-Video BenQ PB7200/ PB7220/ PB7100 User’s Manual Image Source Auto Resize Mirror H Position Source Scan V Position Volume Color Temp Mute Information Ratio Color Tint...
BenQ PB7200/ PB7220/ PB7100 User’s Manual 1. Display Menu FUNCTION DESCRIPTION Corrects any keystoning of the image. Keystone Adjusts the brightness of the image. Brightness Adjusts the degree of difference between dark and light in the image. Contrast Adjusts to avoid the occurrence of flicker.
*This function is not available when the input mode is PC. Adjusts the image to make it appear more red or blue. Tint *This function is available only when the selected System is NTSC. BenQ PB7200/ PB7220/ PB7100 User’s Manual DESCRIPTION 2. 16 : 9 , Video or S-...
BenQ PB7200/ PB7220/ PB7100 User’s Manual 3. Source Menu FUNCTION Mirror Source Scan Volume Mute Operation DESCRIPTION 1. Default 3. Rear screen projection Shows the input source from among RGB-1, RGB-2, YP and Video when several sources are available. Adjusts the volume level.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 4. Control Menu FUNCTION DESCRIPTION Language sets the language for the OSD control menus. Use the 3 / 4 key to select the desired language from among Language English, French, German, Italian, Spanish, Korean, Traditional Chinese and Simplified Chinese.
BenQ PB7200/ PB7220/ PB7100 User’s Manual 5. PIP Menu These functions are available only when the input mode is PC and the PIP source is Video or S-Video. FUNCTION PIP Source PIP Size PIP Position H Position V Position More Options...
Please do not unplug the power cord before POWER is shut down or dur- ing the 90-second cooling process. If the projector is not properly shut down, to protect the lamp, the sys- tem will detect this and cool the lamp for 90 seconds automatically before turning on again.
The Lamp and Temp indicators will light up if the lamp becomes too hot. Turn off the power and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up when turning the power on, please contact your dealer.
Page 27
Step 1. Turn off the projector. Disconnect the power cord from the outlet and the projector. Step 2. Loosen the screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minutes until the lamp has cooled.
BenQ PB7200/ PB7220/ PB7100 User’s Manual Resetting Lamp Hours If you replace the lamp after 2000 hours of operation, please follow the instructions below within 10 minutes of powering on. Temp Information When the LED lights up, it is warning you of the following possible problems: The internal temperature is too high.
Page 29
Please contact your dealer. Fan 3 error, projector will auto shutdown. If you return on the power, and projector shutdown again. Please contact your dealer. BenQ PB7200/ PB7220/ PB7100 User’s Manual Status & Description Power events Lamp events Thermal events...
Page 30
BenQ PB7200/ PB7220/ PB7100 User’s Manual Maintenance Thermal sensor 1 over-temperature, projector will auto shutdown. If you return on the power, and projector shutdown again. Please contact your dealer. Thermal sensor 2 over-temperature, projector will auto shutdown. If you return on the power, and projector shutdown again.
Ceiling mount kit ..........60.J7615.001 Ordering Parts or Getting Information For product information, product assistance, service information, or to order accessories, please visit the BENQ Corporation website at http://www.BenQ.com. BenQ PB7200/ PB7220/ PB7100 User’s Manual Maintenance...
• Adjust brightness, contrast, or saturation. BLURRED IMAGE Try these solutions: • Press Auto on the control panel of the projector or the remote control unit to get better picture quality. • Adjust the focus. • Reposition the unit to improve its projection angle.
Try these solutions: • Replace the batteries with new ones. • Make sure there is no obstacle between the remote control and the projector. • Stand within 6 meters (19.5 feet) of the projector. • Make sure nothing is blocking the front and rear receivers.
BenQ PB7200/ PB7220/ PB7100 User’s Manual SPECIFICATIONS Projector Specifications Technical Specifications Note: All specifications are subject to change without notice. General Product name Model name Optical Display system Lens F/Number Lamp Electrical Power supply Power consumption Mechanical Dimensions Operating temperature...
BenQ PB7200/ PB7220/ PB7100 User’s Manual WARRANTY Limited Warranty BENQ warrants this product against any defects in material and workmanship, under normal usage and storage. Exclusion to Warranty: The lamps are considered a consumable item and are warranted for 90 days or 500 hours, whichever occurs first. Proof of purchase date will be required with any warranty claim.
BenQ PB7200/ PB7220/ PB7100 User’s Manual SAFETY REGULATIONS FCC Statement CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “A”...