Yamaha YZ 2016 Series Owner's Service Manual page 103

1
3
4. If the oil filter element is also to be replaced,
perform the following procedure.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the oil filter element cover "1" and
oil filter element "2".
b. Replace the O-ring "3".
1
3
c. Install the new oil filter element and the oil fil-
ter element cover.
Oil filter element cover bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
5. To check the oil strainer, perform the follow-
ing procedure.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the oil strainer "1".
b. Check the oil strainer.
Damage  Replace.
Clogging due to dirt  Wash with kerosene.
c. Replace the O-ring "2".
2
New
2
3-15
1
New 2
d. Install the oil strainer.
Oil strainer bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
6. Install:
• Gasket
New
• Drain bolt
Drain bolt
20 Nm (2.0 m·kgf, 14 ft·lbf)
7. Pour the specified amount of engine oil into
the oil filler cap hole.
Engine oil quantity
Oil change
0.83 L (0.88 US qt, 0.73 Imp.qt)
With oil filter removal
0.85 L (0.90 US qt, 0.75 Imp.qt)
Quantity (disassembled)
1.10 L (1.16 US qt, 0.97 Imp.qt)
8. Install:
• Oil filler cap
9. Check:
• Oil level
Refer to "CHECKING THE ENGINE OIL
LEVEL" on page 3-14.
ENGINE