Safety Regulations; Layout And Items Supplied - EINHELL REDAXXO 36/25 Original Operating Instructions

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
WARNING!
Read all safety warnings, instructions, illust-
rations and specifi cations provided with this
power tool. Failure to follow all instructions listed
below may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future
reference.
Explanation of the symbols used (see Fig. 20)
1. Important! Read the operating instructions
and follow the warnings and safety instruc-
tions
2. Danger - rotating cutters. Keep your hands
and feet away from the openings when the
machine is running.
3. Important! Keep other persons and animals
away from the danger zone.
4. Important! Protect the machine from the
damp and never expose it to rain.
5. Important! Always wear safety goggles, ear
muff s, protective gloves and heavy-duty work
clothes!
6. Switch off the machine and remove the batte-
ry/batteries before you make any adjustments
or clean the machine.
7. Use rechargeable batteries which are char-
ged to the same level.
8. Noise emission complies with Directive
2000/14/EC!
Anl_Redaxxo_36_25_SPK13.indb 19 Anl_Redaxxo_36_25_SPK13.indb 19
GB

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1 Loading funnel inlet
2 Loading funnel
3 Cover fl ap
4 Wheels
5 Complete chassis
6 Axle
7 Wheel caps
8 Prodder
9 Transport handle
10 Release screw
11 On/Off switch
12 Motor housing
12a Ejector housing with cutter plate
13 Shredded material bag
14 Washers (chassis)
15 Screws (chassis)
16 Hex key
17 Wheel fastening screw
18 Washer (wheel fastening)
19 Sleeve
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless shredder
•
Pusher
•
Shredded debris bag
- 19 -
25.07.2023 11:51:45 25.07.2023 11:51:45