Set Up Menu - Sony SRW-5800 Operation Manual

4-7 SET UP Menu

In the SET UP menu, you can store and recall menu
settings to and from the VTR memory banks and "Memory
Stick", register items to the PF menu, and set items in the
VTR SETUP menu and PANEL SETUP menu.
For details on storing and recalling data to or from the
VTR memory banks or "Memory Stick", and registering
items to the PF menus, see "4-1 Registering and Storing
Menu Settings" on page 37.
"V" indicates that more than one menu page exists.
Button Indication
[F1] VTR BANK
[F2]
MEMORY CARD See "4-1-5 "Memory Stick" Operations" on page 41.
[F4]
PF ASSIGN
[F5] PANEL SETUP
[F6]
VTR SETUP
ALT/[F1] DEFAULT VTR
BANK
ALT/[F2] DEFAULT
MEMORY CARD
ALT/[F7] REMOTE NET1
ALT/[F9] REMOTE 9-PIN
ALT/[F10] REMOTE 50-PIN Selects remote operation using a device connected to the REMOTE 2
Selecting remote operation mode
When operating the VTR with an external device, set the
ALT/[F7] (REMOTE NET1) buttons, ALT/[F9]
(REMOTE 9-PIN) buttons or ALT/[F10] (REMOTE 50-
PIN) buttons to "on".
When the ALT/[F7] (REMOTE NET1) buttons are
set to "on"
You can operate the VTR from a computer or similar
through the network to which the NETWORK 1 connector
is connected.
Function
See "4-1-4 VTR Memory Bank Function" on page 39.
See "4-1-3 Registering Items to the VTR SETUP Menu" on page 38.
See "4-7-2 PANEL SETUP Menu" on page 96.
See "4-7-1 VTR SETUP Menu" on page 94.
See "4-1-10 Saving and Recalling DEFAULT Settings on a Bank" on
page 47.
See "4-1-11 Saving and Recalling DEFAULT Settings in a "Memory Stick""
on page 48.
Selects access from the NETWORK 1 connector.
Selects remote operation using a device connected to the REMOTE 1-
IN(9P) or REMOTE 1-I/O(9P) connector.
PARALLEL I/O(50P) connector.
To activate the SET UP menu
Press the SET UP button.
To change the SET UP menu page
Press the ALT button.
When the ALT/[F9] (REMOTE 9-PIN) buttons are
set to "on"
You can operate the VTR with a device connected to the
REMOTE 1-IN(9P) or REMOTE 1-I/O(9P) connector.
When the ALT/[F10] (REMOTE 50-PIN) buttons are
set to "on"
You can operate the VTR with a device connected to the
REMOTE 2 PARALLEL I/O(50P) connector.
Settings
on, off
on, off
on, off
93
4-7 SET UP Menu