Table of Contents
Advertisement
Controlling The Rear Climate Controls
From The Front MTC Display/
Touchscreen
The Three-Zone Manual Temperature Control (MTC)
system allows for adjustment of the rear climate con-
trols from the front MTC display/touchscreen.
To change the rear system settings:
•
Press the Rear Climate button on the touchscreen to
display the rear climate controls. The control func-
tions now operate the rear system.
•
Press the Front Climate button on the touchscreen
to return to the front climate controls.
REAR CLIMATE CONTROL BUTTON
Press and release this button to access the
rear climate controls. The indicator will illu-
minate when the rear climate controls are
on.
REAR LOCK BUTTON
Press and release this button to lock out the
rear manual temperature controls from
adjusting the rear temperature and blower
settings.
FRONT CLIMATE BUTTON
Press and release this button to change the
display on the Uconnect system back to the
Front Climate Controls.
REAR TEMPERATURE CONTROL
These buttons provide the rear passengers with inde-
pendent temperature control.
Push the up arrow button on the touch-
screen to increase the temperature.
Push the down arrow button on the touch-
screen to decrease the temperature.
NOTE:
When the SYNC feature is active, the passenger's tem-
perature moves up and down with the driver's
temperature.
SYNC BUTTON
Press the SYNC button on the touchscreen
to toggle the SYNC feature on/off. The SYNC
indicator is illuminated when this feature is
enabled. SYNC is used to synchronize the
front and rear passenger temperature settings with the
driver temperature setting. Changing the front or rear
passenger temperature setting while in SYNC exits this
feature.
NOTE:
The SYNC setting is only available on the touchscreen.
BLOWER CONTROL
Blower Control is used to regulate the
amount of air forced through the Climate
Control system. There are seven blower
speeds available. Adjusting the blower
causes automatic mode to switch to manual operation.
The speeds can be selected using the buttons on the
touchscreen.
GETTING TO KNOW YOUR VEHICLE
PANEL MODE
Press this button on the touchscreen to
change the air distribution mode to Panel
Mode. In Panel Mode, air comes from the
outlets in the headliner. Each of these out-
lets can be individually adjusted to direct the flow of air.
Moving the air vanes of the outlets to one side will shut
off the airflow.
BI-LEVEL MODE
Press this button on the touchscreen to
change the air distribution mode to Bi-Level
Mode. In Bi-Level Mode, air comes from the
headliner outlets and floor outlets.
NOTE:
Bi-Level Mode is designed under comfort conditions to
provide cooler air out of the panel outlets and warmer
air from the floor outlets.
FLOOR MODE
Press this button on the touchscreen to
change the air distribution mode to Floor
Mode. In Floor Mode, air comes from the
floor outlets.
REAR PASSENGER CLIMATE CONTROL OFF
BUTTON
Press and release this button to turn the
Rear Climate Controls off.
45
2
Advertisement
Table of Contents
