Chrysler VOYAGER 2024 Owner's Manual page 107

Table of Contents

Advertisement

Safety & Driving Assistance
After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available:
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
Forward Collision Warning Sensitivity — Located In
Automatic Emergency Braking Submenu
Forward Collision Warning — Located In Automatic
Emergency Braking Submenu
Pedestrian Emergency Braking — Located In Auto-
matic Emergency Braking Submenu
ParkSense
Rear ParkSense Volume
Rear ParkSense Braking Assist
Sliding Door Alert
Blind Spot Alert
Hill Start Assist
Rear Seat Alert
This setting will change the distance at which the Forward Collision Warning (FCW) alert sounds. The "Medium" setting will
have the FCW system signal when an object is in view, and the possibility of a collision is detected. The "Near" setting will
have the FCW system signal when the object is closer to the vehicle. The "Far" setting will have the FCW system signal
when an object is at a far distance from the vehicle.
This setting will turn the Forward Collision Warning system on or off. The "Off" setting will deactivate the FCW system. The
"Warning Only" setting will provide only an audible chime when a collision is detected. The "Warning + Active Braking" set-
ting will provide an audible chime and apply some brake pressure when a collision is detected.
This setting will turn the Pedestrian Emergency Braking system "Off" or to "Warning & Active Braking".
This setting will change the type of ParkSense alert when a close object is detected. The "Sound Only" setting will provide
an audible chime when an object is detected. The "Sound and Display" setting will provide both an audible chime and a
visual display when an object is detected.
This setting adjusts the volume of the Rear ParkSense system. The available settings are "Low", "Medium", and "High".
This setting will turn the Rear ParkSense Braking Assist on or off.
This setting will turn the Sliding Door Alert on and off.
This setting will change the type of alert provided when an object is detected in a vehicle's blind spot. The "Off" setting will
turn off Blind Spot Alert. The "Lights" setting will activate the Blind Spot Alert lights on the outside mirrors. The "Lights &
Chime" setting will activate both the lights on the outside mirrors and an audible chime.
This setting will turn the Hill Start Assist system on or off.
When this setting is turned on and the rear doors are opened while the engine is running, or if the engine is turned on
within 10 minutes of the door opening, a message will appear to check the rear seat when the vehicle is powered OFF.
Description
MULTIMEDIA
105
5

Advertisement

Table of Contents
loading

Table of Contents