Omron HEM-907 Instruction Manual page 18

How to Measure Blood Pressure
1. Wrap the arm cuff over the
patient's arm.
3. Push the ON/OFF (power)
Button to turn on the power.
5. Set the P-SET (pressure set-
ting) Volume to "AUTO" or the
•
When setting the P-SET to
"AUTO", turn the Volume coun-
terclockwise as far as it goes un-
til you can hear the click sound.
•
When the systolic pressure is
expected to exceed 220 mmHg,
sible in "AUTO" setting.
30 to 40 mmHg higher than the
expected systolic pressure.
7. Push the ON/OFF (power)
Button to turn off the power.
18
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
280
AUTO
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
AUTO 280
-
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
AUTO 280
(in MANU. Mode)
2. Place the stethoscope on the
patient's arm.
4. Set the MODE Selector to
"MANU.".
6. Push the START Button to
start the measurement.
•
In the "AUTO" setting, the unit
sure considered to be 30 to
40 mmHg above the expected
systolic pressure, then start
•
only while the START Button is
pushed.
•
The pressure display is syn-
chronized with the pulse rate
and renewed.
•
Each time the DEFLATION
5~10 mmHg.
•
When you press the STOP But-
ends the operation.
ON/OFF
START
HIDE
P-SET SINGLE MODE
140 180 AVG. MANU.
100 220 CHECK
260 STOP
AUTO 280
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
280
AUTO
ON/OFF
START
-
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
280
AUTO