Omron HEM-907 Instruction Manual page 17

1. Wrap the arm cuff over the
patient's arm.
3. Set the MODE Selector to
"AVG.".
5. Push the START Button to start
the measurement.
•
Set the unit to the start time of
unit starts measurement auto-
matically.
•
After displaying the results of
measure blood pressure in the
set number of times automati-
cally by taking an interval.
•
For the setting of the number of
measurements, the waiting time
before start of measurement,
and the interval time, refer to
Page 7.
7. Push the ON/OFF (power)
Button to turn off the power.
How to Measure Blood Pressure
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
MANU.
AVG.
220 CHECK
100
STOP
260
AUTO 280
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
AUTO 280
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
MANU.
AVG.
220 CHECK
100
STOP
260
AUTO 280
2. Push the ON/OFF (power)
Button to turn on the power.
4. Set the P-SET (pressure set-
ting) Volume to "AUTO" or the
•
When setting the P-SET to
"AUTO", turn the Volume coun-
terclockwise as far as it goes
until you can hear the click
sound.
•
When the systolic pressure is
expected to exceed 220 mmHg,
sible in "AUTO" setting.
30 to 40 mmHg higher than the
expected systolic pressure.
6. Measured results are
displayed.
•
After the measurement is
completed, average values are
displayed.
•
Each time a DEFLATION
pushed, the measurement
results for each time are
displayed.
To stop the measurement during the measurement:
Push the STOP Button.
To start the stopped measurement again:
Push the START Button.
(in AVG. Mode)
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220 CHECK
100
STOP
260
AUTO 280
ON/OFF
START
HIDE
P-SET MODE
SINGLE
140 180
AVG. MANU.
220
CHECK
100
STOP
260
AUTO 280
-
SYS
mmHg
DIA
mmHg
PULSE
BPM
HIDE
17